CPE210 v2

Which one do I have?

TP-Link ships this model in more than one hardware revision, and they do not share firmware. The revision is printed on the label on the underside, usually after the model — Ver 1.0, V4.6. Getting it wrong is the easiest way to read the wrong answer here.

• CPE210 v1 Not enough evidence 2 releases
• CPE210 v2 (UN) Gone quiet 1 releases
• CPE210 v3 Not enough evidence 0 releases
• CPE210 v3.2 (US) Actively updated 6 releases
• CPE210 v3.26 (US) Slowing down 5 releases
• CPE210 v3.28 (US) Slowing down 5 releases

Firmware history

1. CPE210(US)_V2.0_20201110 4 December 2020

   Release notes — disclosure 0.25

   Bug Fixes: 1. Fix the problem that the CPE firmware may not be upgraded through Pharos Control.

   Archived page, fetched 29 September 2026

2. CPE210(US)_V2_2020612 14 July 2020

   Cites CVE-2020-8597

   Release notes — disclosure 0.87

   New Features/Enhancements: 1. Optimized the SSID scan process. 2. Extended the SSL certificate validity to 2029. Bug Fixed: 1. Fixed the CVE-2020-8597 PPPoE security problem. 2. Fixed the bug that CPE may failed to connect with TP-Link Deco products.

   Archived page, fetched 29 September 2026

3. CPE210(US)_V2_200612 14 July 2020

   Cites CVE-2020-8597

   Release notes — disclosure 0.87

   New Features/Enhancements: 1. Optimized the SSID scan process. 2. Extended the SSL certificate validity to 2029. Bug Fixed: 1. Fixed the CVE-2020-8597 PPPoE security problem. 2. Fixed the bug that CPE may failed to connect with TP-Link Deco products.

   Archived page, fetched 23 September 2026

4. CPE210(US)_V2_20190620 25 July 2019

   Release notes — disclosure 0.41

   Modifications&Enhancement 1. Upgrade OpenSSL version from 0.9.8k to 1.0.2q, and support TLSv1.2 protocol. 2. Optimize the memory usage of web server.

   Archived page, fetched 29 September 2026

5. CPE210(US)_V2_20190228 11 April 2019

   Release notes — disclosure 0.42

   Modifications and Bug Fixes: 1.Improved web UI display. 2.Added Antenna Alignment function. 3.Now the https is enabled by default. 4.Added IPV6 function.

   Archived page, fetched 29 September 2026

6. CPE210(US)_V2_20180928 29 October 2018

   Release notes — disclosure 0.58

   Modifications and Bug Fixes: 1. Fixed the problem that the device may be reset to factory defaults due to unstable power. 2. Improved web UI display. 3. Fixed the problem that Transmit Power could be set as improper value. 4. Fixed the problem that when the wireless interference is serious, the client may be not connected to the AP when the WPA/WPA2 encryption mode is enabled. 5. Fixed the problem that the "Failed to get data" information may be wrongly displayed.

   Archived page, fetched 29 September 2026

7. CPE210(US)_V2_180117 13 February 2018

   Release notes — disclosure 0.61

   Modifications and Bug Fixes: 1. Fixed the WPA2 vulnerability. 2. Fixed the Management VLAN issue that wireless clients will fail to obtian IP addresses when Management VLAN is enabled and given a same VLAN ID as that of SSID VLAN. 3. Improved web UI display. 4. Fixed the bug that a subnet range cannot be configured for the "Set Source" of the SNMP function. 5. Fixed the bug that CPE's web management page can't be accessed with a new username which contains special symbols. 6. Fixed the bug that when the management vlan and wireless encryption are enabled, wireless client may fail to connect to the CPE.

   Archived page, fetched 29 September 2026

Evidence

3 archived pages sit behind this record, the earliest read on 1 August 2026. Everything above was read from them, and each is kept byte for byte so it can be checked after the vendor edits the original.

Identifiers: marketing_name CPE210 · openwrt_id tplink_cpe210-v2

Judged by lifecycle-1 on 29 September 2026. How these verdicts are computed.

Machine-readable: JSON · RSS